Setpoints (display points), lamps and buttons can be custom labeled by the user with plastic inserts.  The inserts can be custom legended with text and/or graphics, and slipped into protective pockets behind the faceplate.

Lamps can be individually controlled to be on, off, or flash.  Each button can be individually configured to operate as either a momentary or alternate-action pushbutton.

The OM613 Operator  Panel is part of Optimation's OptiMate® series. Each OptiMate® module is designed to connect to a microprocessor or to most PLC's with a single cable connection.  OptiMate® modules can be used individually, or together with any combination of other OptiMate® modules.

When used with a microprocessor system, simple communications over either an RS232 or RS422 communications cable allows the microprocessor to directly read setpoints and to write display values.

When used with a PLC, operation is transparent to the user.  Panel functions tie directly into your PLC ladder logic program.   The OM613 takes care of the rest.

Features
4 independent setpoints or display points with four-digit numeric display
Two large LED light bars
Four tactile snap membrane function buttons 
Non-volitile storage of setpoints 
User-Legendable
Stand alone capability with direct connection to most PLCs
Compatible with any computer via serial communications
Mix and match with other OptiMate® modules

Benefits
Saves valuable I/O rack space
Eliminates the need for controller I/O modules for operator panel use
Reduces system integration and retrofit costs
Removes and replaces maintainability
Rapid future expansion
Attractive, eye-appealing appearance
Direct Connect to PLCs

OptiMate® modules connect and operate directly with most major PLCs.  A simple cable connection allows the PLC to control each lamp directly simply by setting bits in data registers.  Everything else is totally transparent.

PLC Multi-Modules
The OptiMate® series provides the means to construct large custom panels with standard building block modules.  OptiMate® modules can be grouped together or separated by up to 4000 feet.  Any combination of operator panels and I/O can be incorporated into a system. 

Microprocessor-Based Systems
OptiMate® modules connect to any computer or microprocessor-based system through a serial link.  Either RS232 or RS422 communications can be employed.  The microprocessor controller simply polls for module data or sends module commands to completely control the operator panels and I/O.

Legending the Field Points
Legending the OM613 module involves simply sliding a legend transparency into the three pockets in the panel overlay.  The bezel can be removed from the front of the module.  Once this is done legend transparencies can be placed behind the overlay.

A legend transparency can be created by a number of methods. Computer graphics programs combined with overhead transparency paper and a laser printer and/or copier produce excellent results.  Other options are listed in the OM613 data sheet

Specifications

Physical
Recessed Mount Housing 6.6"L x 4.0"H x 1.25"D
Cutout size for above 3.55"Hx5.80"L
Panel Fasteners : Four, 6x32 threaded studs, (on ends, symmetrical about center line)
LED numeric digit height : 0.3 inch
Housing color :  Dark gray 

Electrical
Power :  (all 8's)  8 - 30VDC @ 2.2 Watts, 180 mA @ 12VDC, 90 mA @ 24VDC
Power connector : Pluggable terminal block, 2 position

Communications
RS232 and RS422
4800 to 19200 baud
Compatible with most major PLC protocols
Microprocessor-compatible protocol
15 pin female 'D' shell connector

Environmental
Enclosure   - NEMA 4 recessed mount
Temperature   - 0 to 50 C
Humidity   - 95% Non-condensing

Labeling of Field Points
User-defined slide-in label

Ordering
OM613 - Module with Dark gray enclosure. Please note that each PLC has a different suffix according to the following table.